Signal / United States | Nashville-area integration supplier / Who holds the records for an industrial robot handover

Samuel bought Alpha Integration. Where are your machine’s records?

Samuel bought Alpha Integration and says the Nashville business will use a new name. Samuel already offers an online record of past service and warranty for its customers. The deal announcement does not say old Alpha records will appear there. If you already have a machine from Alpha, check where its records are before you need them.

Use this if

You already oversee an Alpha machine in a U.S. factory or support an authorised U.S. industrial robot project nearing handover.

No action if

If the machine, sign-off or responsible contact does not match, ask the project lead to resolve the mismatch before relying on the handover. Do not run, adjust or test equipment based on this article.

Research checked at:

Article time zone:

Asia/Singapore

Information cutoff:

Who is outside the scope:

U.S. industrial robot handover paperwork only. No equipment instructions, approval, compliance finding, or interpretation of customer rights.

First published

Technology

OTR Emerging Data

Technology | One industrial robot handover

Alpha Integration has a new name. Who signs for your machine?

A new supplier name, an online history of past service, and a signed record from your own factory are three different things.

What the sources show

At 9 am Eastern time on 20 November, 10 pm in Singapore, Samuel announced that it had acquired Alpha Integration. Samuel says the business will operate as Samuel Automation – Nashville immediately. The announcement does not name a customer or say whether anyone responsible for an existing project has changed.

The new supplier name does not tell you where the records are
  • The acquisition announcementAlpha will use the name Samuel Automation – Nashville
  • The 2025 customer portal announcementSamuel said it would show existing customers their machine’s warranty and service history. It does not confirm any Alpha records moved.
Company announcement, 20 November 2026. It did not announce a move of customer records.

The new connection

In September 2025, Samuel launched an online area that it said would show open requests for help, machine warranty information and past service. Its November 2026 announcement does not say whether existing Alpha customers or their records will move there. Even a record of past service would not replace the separate signed record that shows a site accepted that machine.

  1. Match one machine
  2. Find both records
  3. Confirm who signs and keeps them

A realistic next move

Pick one machine. Ask the contact you already use which account or file keeps its warranty and past service records. Before an upcoming handover, ask your own project lead separately who holds the signed site acceptance and written risk check for that machine. If both are already easy to find, keep your current process.

What to ask about the same machine
  1. 1. Pick one machineUse its number in the paperwork you already have
  2. 2. Ask your usual contactWhere are past service and warranty records kept?
  3. 3. Check a pending handoverHas the site signed off? If so, where is the signed record for this machine?
Paperwork only. No operation or safety testing.

A supplier name change does not show that an agreement, approval, warranty, record or local contact changed. We found no named customer, revised contract or signed handover affected by this announcement. This is a document check, not a legal or safety decision.

The connection

A new supplier name is not a handover

Samuel says the former Alpha business will use a new operating name. It has not published a move date or any instructions for old customer records in this announcement.

Observed

At 9 am Eastern time on 20 November, 10 pm in Singapore, Samuel announced that it had acquired Alpha Integration. Samuel says the business will operate as Samuel Automation – Nashville immediately. The announcement does not name a customer or say whether anyone responsible for an existing project has changed.

The connection

In September 2025, Samuel launched an online area that it said would show open requests for help, machine warranty information and past service. Its November 2026 announcement does not say whether existing Alpha customers or their records will move there. Even a record of past service would not replace the separate signed record that shows a site accepted that machine.

How the effect travels

The project team uses the machine identifier and signed scope to link the supplier’s documents to the site’s own verified acceptance record. The company announcement does not make that link for any customer.

OSHA’s older technical manual separates the integrator’s site acceptance work from the user’s verification and says the employer remains responsible after acceptance. It also discusses the integrator documenting the risk assessment before commissioning and providing it to the employer. The 2025 U.S. standard update is newer than some material the manual cites; ask the qualified safety lead which edition and contract terms apply to your machine.

Two roles at an industrial robot handover
Two roles at an industrial robot handover
RoleWhat the OSHA manual describes
IntegratorDocuments the risk assessment and provides it to the employer; performs site acceptance
User / employerVerifies the site acceptance
Older U.S. guidance, not a finding about this company or the edition applicable to a particular machine.

The decision path

Check the records for one machine

1. Match the machine

Use the same identifier on the existing signed scope.

2. Check both records

Find the site acceptance record and written risk assessment for that machine.

3. Ask who signs and keeps them

Use an existing project contact and your authorised project lead.

4. Stop if unclear

If the machine, sign-off or responsible contact does not match, ask the project lead to resolve the mismatch before relying on the handover. Do not run, adjust or test equipment based on this article.

The supplier’s new name refers to Nashville, Tennessee. The document comparison is limited to existing U.S. industrial robot projects.

Optional research / Checks 1–10

What the sources support

Money flow

No deal price or customer payment verified.

Orders

No new or transferred order evidenced.

Bottleneck

Can the project team retrieve records and identify who signs?

Beneficiaries

Existing handover buyers may benefit from a clarified record.

Company finances

No company financial effects claimed.

Costs payback

Possible staff time only; no amount verified.

Ownership

Operating name change shown, not customer-agreement transfer.

Hiring

No headcount change shown.

Government

OSHA guidance is distinct from newer standards.

Language

The customer should look for the exact machine identifier, not just the name.

Optional research / Checks 11–20

What would change the reading

Behaviour

No buyer behaviour observed.

Contradiction

Same project leads and records may be unchanged.

Missing proof

No pending named customer or actual machine handover verified.

Approval

Authorised project leads handle any acceptance, not the reader acting on the article alone.

Alternatives

Keep existing route if records and contact match.

Geography

United States and Nashville context only.

History

The independent guidance predates the acquisition.

Awareness

Public new name does not establish each customer was notified.

Countercase

No existing agreement is interpreted or modified here.

Action clock

Use the next already planned handover review.

Evidence & next review

Read the originals

Samuel acquisition announcement

Published 2026-11-20T09:00:00-05:00

Samuel says it has acquired Alpha Integration and that Alpha will operate as Samuel Automation – Nashville, effective immediately. No project-specific changes stated.

Source record

Publisher: Samuel, Son & Co.

Original language: English

Source publication date 2026-11-20T09:00:00-05:00

Technical guidance for employer and safety audiences, updated in 2021 per a 2023 archived notice. Its cited editions include older standards. It distinguishes integrator records, user verification at site acceptance and the employer’s continuing responsibility; it is not a current-edition finding for any specific machine.

Source record

Publisher: U.S. OSHA

Original language: English

Confirms OSHA’s older directive was superseded by the Technical Manual, not that the manual’s cited standards are the latest.

Source record

Publisher: U.S. OSHA

Original language: English

published date precision: day

Source publication date 2023-03-15

Independent standards publisher identifies the newer 2025 edition for robots and robot applications. Not a conclusion about which edition applies to any contract or existing machine.

Source record

Publisher: Association for Advancing Automation

Original language: English

published date precision: day

Source publication date 2025-09-09

Historical brand document lists Alpha Integration as assembly and inspection automation. Not evidence of current ownership, support contacts or transfer of customer obligations.

Source record

Publisher: Tooling Tech Group

Original language: English

Describes a detailed service ticket for each covered case in the customer portal. No statement of Alpha coverage or signed site acceptance.

Source record

Publisher: Samuel Automation

Original language: English

The company listed open requests for help, machine warranty and service history. It did not say it covered former Alpha machines or signed site acceptance.

Source record

Publisher: Samuel, Son & Co.

Original language: English

published date precision: day

Source publication date 2025-09-17

A supplier name change does not show that an agreement, approval, warranty, record or local contact changed. We found no named customer, revised contract or signed handover affected by this announcement. This is a document check, not a legal or safety decision.

Consequences and economics

First-order consequence

Buyers may start seeing a different supplier name.

Second-order consequence

A buyer might need to confirm where old records are filed.

Third-order consequence

Unclear ownership could cause more coordination before sign-off.

Fourth-order consequence

A buyer could ask for machine-linked records as a standard handover item.

Fifth-order consequence

Repeat customers could preserve a clearer record across future ownership changes.

Observed costs and benefits

No purchase price, customer handover cost or downtime was reported. A missing record could require extra coordination; this is not evidence of a delay or loss.

Challenge and uncertainty

Disconfirming evidence

If the machine, sign-off or responsible contact does not match, ask the project lead to resolve the mismatch before relying on the handover. Do not run, adjust or test equipment based on this article.

Alternative explanation

Keep your existing contact and handover process until an authorised project lead confirms any revised route.

What would confirm it

Confirm whether current records match the same machine and whether the authorised project lead confirms the record holder and sign-off in writing.

What would disprove it

If the records and contacts already match and the project lead confirms where they are, the acquisition gives no reason on its own to change your process.

AI powered research